MH-V500立臥兩用加工中心
.jpg)
| 機械規格表（Machine Specification） | ||||
| 項目 | ITEM | MH-V500 | MH-VH480 | |
| 工作臺 | Table | |||
| 工作臺面積 | Table | mm | 1900×420 | 1900×420 |
| X軸行程 | X axis stroke | mm | 1300 | 1300 |
| Y軸行程 | Y axis stroke | mm | 550 | 850 |
| Z軸行程 | Z axis stroke | mm | 600 | 780 |
| T行槽(尺寸×槽數×間距) | T-slot(size×number×distance) | mm | 18×5×80 | 18×5×80 |
| 三軸進給率 | 3 axis feedrate | mm/min | 30-2800 | 30-2800/30-2000 |
| 三軸快移速率 | 3 axis rapid travel | mm/min | 2800 | 2800/5000 |
| 切削工件參考工作范圍 | Range of cutting reference | |||
| 切削長度 | Cutting length | mm | 1300 | 1300 |
| 切削寬度 | Cutting width | mm | 470 | 450 |
| 切削高度 | Cutting height | mm | 500 | 500 |
| 承載重量 | Loading weight | kg | 1500 | 1500 |
| 立主軸 | Vertical spindle | |||
| 主軸轉速(60Hz) | Spindle speed | rpm | 45-1500 18 Steps | 45-1500 18 Steps |
| 主軸端空斜度 | Spindle taper | N.S.T | NT50 | NT50 |
| 軸端至工作臺面距離 | Distance of spindle nose to table surface | mm | 50-650 | 0-583 |
| 軸心至機柱滑動面距離 | Distance of spindle center to column slide surface | mm | 500 | 480 |
| 主軸頭左右旋轉角度 | Swiveling angle of spindle head（R&L） | ／ | ／ | |
| 主軸通心軸上下行程 | Quill travel | mm | ／ | ／ |
| 主軸進給 | Speed feed | mm/erv | ／ | ／ |
| 橫主軸 | Horizontal spindle | |||
| 主軸轉速(60Hz) | Spindle speed | rpm | ／ | 45-1500 18 Steps |
| 主軸端空斜度 | Spindle taper | N.S.T | ／ | NT50 |
| 軸心至工作臺面距離 | Distance of spindle center to table surface | mm | ／ | -10~770 |
| 軸端至工作臺面距離 | Distance of spindle nose to table surface | mm | ／ | 260 |
| 馬達 | Power | |||
| 主軸馬達 | Spindle motor | 10HP×4P AC | 10HP×4P AC | |
| X軸進給馬達 | X axis feedrate motor | 2HP | 2HP | |
| Y軸進給馬達 | Y axis feedrate motor | 2HP | 2HP | |
| Z軸進給馬達 | Z axis feedrate motor | 2HP | 2HP | |
| 一般規格 | Miscellangeous | |||
| 凈重(約) | Net weight(Approx) | kg | 5200 | 5500 |
| 毛重(約) | Gross weight(Appox) | kg | 6000 | 6500 |
| 外觀尺寸 | Extemal dimensions(LxWxH) | mm | 2820×2555×2720 | 2710×2555×2830 |
| 裝箱尺寸 | Packing dimensions(LxWxH) | mm | 2670×2280×2550 | 3050×2280×2560 |
| 注：產品持續改進為本公司的經營理念，本公司保留產品規格外觀、配置變更或停用的權利，本型錄所有內容僅供參考，如與實機不符，請以實機為主。 | ||||
| Note：The specifications are subject to change without notice. All care is taken to assure the information contained in this brochure is assurate and correct. Daiwa Ecoca is not responible for typeraphical or other errors. | ||||
| 仕樣は変更すはることが、親切に勝つてくだちぃアジ! | ||||
| Specifications subject to change,please prevail in kind! | ||||
