| 軸徑 | 型號 | 重量 | 尺寸 | 基本額定載荷 | 極限轉(zhuǎn)速 | |||||
| Shaft | Designation | Mass | Dimensions | Basic Load Ratings | Limiting | |||||
| Diameter | d | D | B | r | s | 動 Cr | 靜 Cor | Speed | ||
| Dynamic | Static | |||||||||
| mm | g | min. | kN | kN | rpm | |||||
| 20 | SL18 3004 | 110 | 20 | 42 | 16 | 0.6 | 1.5 | 27.5 | 26.5 | 9000 |
| SL18 5004 | 200 | 20 | 42 | 30 | 0.6 | 1.0 | 47.5 | 53.0 | 9000 | |
| 25 | SL18 3005 | 120 | 25 | 47 | 16 | 0.6 | 1.5 | 31.5 | 32.5 | 7000 |
| SL18 5005 | 230 | 25 | 47 | 30 | 0.6 | 1.0 | 54.0 | 65.0 | 7000 | |
| 30 | SL18 3006 | 200 | 30 | 55 | 19 | 1.0 | 2.0 | 40.5 | 43.0 | 6500 |
| SL18 5006 | 350 | 30 | 55 | 34 | 1.0 | 1.5 | 70.0 | 86.0 | 6500 | |
| 35 | SL18 3007 | 260 | 35 | 62 | 20 | 1.0 | 2.0 | 49.5 | 55.0 | 6000 |
| SL18 5007 | 460 | 35 | 62 | 36 | 1.0 | 1.5 | 85.0 | 109.0 | 5500 | |
| 40 | SL18 3008 | 310 | 40 | 68 | 21 | 1.0 | 2.0 | 59.0 | 68.0 | 5000 |
| SL18 5008 | 560 | 40 | 68 | 38 | 1.0 | 1.5 | 101.0 | 136.0 | 5000 | |
| 45 | SL18 3009 | 400 | 45 | 75 | 23 | 1.0 | 2.0 | 63.0 | 76.0 | 5000 |
| SL18 5009 | 710 | 45 | 75 | 40 | 1.0 | 1.5 | 108.0 | 151.0 | 4700 | |
| 50 | SL18 3010 | 430 | 50 | 80 | 23 | 1.0 | 2.0 | 79.0 | 96.0 | 4500 |
| SL18 5010 | 760 | 50 | 80 | 40 | 1.0 | 1.5 | 135.0 | 191.0 | 4200 | |
| 55 | SL18 3011 | 640 | 55 | 90 | 26 | 1.1 | 2.0 | 107.0 | 138.0 | 3800 |
| SL18 5011 | 1160 | 55 | 90 | 46 | 1.1 | 1.5 | 184.0 | 275.0 | 3600 | |
| 60 | SL18 3012 | 690 | 60 | 95 | 26 | 1.1 | 2.0 | 110.0 | 145.0 | 3600 |
| SL18 5012 | 1240 | 60 | 95 | 46 | 1.1 | 1.5 | 189.0 | 290.0 | 3400 | |
| 65 | SL18 3013 | 730 | 65 | 100 | 26 | 1.1 | 2.0 | 116.0 | 159.0 | 3300 |
| SL18 5013 | 1320 | 65 | 100 | 46 | 1.1 | 1.5 | 199.0 | 320.0 | 3100 | |
| 70 | SL18 3014 | 1020 | 70 | 110 | 30 | 1.1 | 3.0 | 137.0 | 176.0 | 3400 |
| SL18 5014 | 1850 | 70 | 110 | 54 | 1.1 | 3.0 | 235.0 | 355.0 | 3100 | |
說明：
1.表中所列基本額定載荷、極限轉(zhuǎn)速和重量，僅供選擇參考用。
2.脂潤滑時，極限轉(zhuǎn)速為表列數(shù)值的50%。
Note:
1.These load, speed and mass is reference of choice only.
2.With grease lubrication, 50% of these limiting speed will apply.
